Assembly Instructions

HARDWARE LIST

1/4'' Spring Washer

1/4" Flat Washer

1/4" *38mm Allen Bolt

PARTS LIST

Dresser

Made in Vietnam

Cleaning instructions: Clean using soft cloth

Page: 1/2

ASSEMBLY INSTRUCTIONS

Read instructions carefully prior to assembly.

Thank you for purchasing this quality product. Check carefully for small parts which may come loose

during shipment.

Remove all components from pack and place top down on soft surface such as carpet or cloth to prevent

scratching the finish. Identify and count all parts as specified below.

It is recommended to use two or more persons during the assembly process.

1/4" Allen Key

Mirror

Mirror Support

Tipping restraint

Step 1:

Step 1: Attach Mirror Support (3) to back of Dresser (1) by using Flat Washer (D), Spring

Washer (C), Allen Bolt (B) and tighten with Allen Key (A).

ITEM: DRESSER

MIRROR

PAGE 1
ASSEMBLY INSTRUCTIONS ITEM: DRESSER MIRROR Read instructions carefully prior to assembly. Thank you for purchasing this quality product. Check carefully for small parts which may come loose during shipment. Remove all components from pack and place top down on soft surface such as carpet or cloth to prevent scratching the finish. Identify and count all parts as specified below. It is recommended to use two or more persons during the assembly process.
PAGE 2
ASSEMBLY INSTRUCTIONS ITEM: DRESSER MIRROR ***Caution: Please read all instructions carefully before starting the assembly process. These parts are cumbersome and heavy. Therefore, two people are recommended in order to prevent personal injury and insure the parts are not damaged during the assembly. Step 2: Step 2: Attach Mirror Support (3) to back of Mirror (2) by using Flat Washer (D), Spring Washer (C), Allen Bolt (B) and tighten with Allen Key (A).