Assembly Instructions

Careful unpack all lamp parts from the carton.
1. Place the Base in an upright position on the floor.
2. Be sure the power to the installation point is power off.
3. Install the Edison Bulb (Included）onto the lamp before connecting the plug to the
electricity outlet Box.
4. Position the Socket through the hole on the top of the Glass Shade.
Turn Knobs to make the Glass Shade fixed.
This portable lamp has a polarized plug as a safety feature
to reduce the risk of electric shock. This plug will fit in
a polarized outlet only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Never use with an extension
cord unless plug can be fully inserted. Do not attempt to defeat this safety feature.
IMPORTANT SAFETY
INSTRUCTIONS
Socket
ASSEMBLY INSTRUCTIONS