Assembly Instructions

1. CAREFULLY UNPACK AND PLACE ALL PARTS ON A SMOOTH SURFACE AND

LINE THEM UP AS PER THE SKETCH.

2. INSTALL THE BULB (2, NOT INCLUDED) TO THE FIXTURE (1).

**** IMPORTANT INITIAL AND FUTURE ADJUSTMENT INSTRUCTIONS ****

3. SWING THE TOP ARM ALL THE WAY UPWARD TO THE MAXIMUM

ANGLE (190 DEGREES)-ENDING WITH A CLICK (3).

4. SWING THE TOP ARM ALL THE WAY DOWNWARD TO THE MINIMUM

ANGLE (90 DEGREES)-ENDING WITH A CLICK (4).

5. SWING THE TOP ARM UPWARD TO THE DESIRED HEIGHT ADJUSTMENT.

EACH POSSIBLE ADJUSTMENT WILL END WITH A CLICK (5). DO NOT

FORCE DOWNWARD ADJUSTMENTS-TO MAKE DOWNWARD

ADJUSTMENTS RETURN TO STEP 3.

6. INSERT THE POLARIZED PLUG INTO OUTLET, TURN ON THE SWITCH

AND ENJOY YOUR LAMP

IMPORTANT SAFETY INSTRUCTIONS:

THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE

OTHER) AS A SAFETY FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK. THIS

PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY. IF IT DOES NOT FIT

FULLY IN THE OUTLET, REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT

A QUALIFIED ELECTRICIAN. NEVER USE WITH AN EXTENSION CORD UNLESS THE

PLUG CAN BE FULLY AND EASILY INSERTED. DO NOT ATTEMPT TO ALTER THE

PLUG.

USE 60 WATTAGE (MAXIMUM) TYPE

A BULB (BULB NOT INCLUDED)

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

ASSEMBLY INSTRUCTIONS

PAGE 1
ASSEMBLY INSTRUCTIONS 1. CAREFULLY UNPACK AND PLACE ALL PARTS ON A SMOOTH SURFACE AND LINE THEM UP AS PER THE SKETCH. 2. INSTALL THE BULB (2, NOT INCLUDED) TO THE FIXTURE (1). **** IMPORTANT INITIAL AND FUTURE ADJUSTMENT INSTRUCTIONS **** 3. SWING THE TOP ARM ALL THE WAY UPWARD TO THE MAXIMUM ANGLE (190 DEGREES)-ENDING WITH A CLICK (3). 4. SWING THE TOP ARM ALL THE WAY DOWNWARD TO THE MINIMUM ANGLE (90 DEGREES)-ENDING WITH A CLICK (4). 5. SWING THE TOP ARM UPWARD TO THE DESIRED HEIGHT ADJUSTMENT.