SPECIFICATION SHEET Small Pendant Light 4⅝” 113⁄16” 481⁄16” 56” 63⁄16” 213⁄16” 5” 65⁄16” All measurements are approximate and may vary +/- 1/4" SPECIFICATION SHEET
Installation, Care Guide and Warranty Pendants
INSTALLATION AND CARE GUIDE NOTICE: Consult a professional if needed. NOTICE: Do not change or modify the product in any way. Doing so may compromise the products structural integrity and will void the warranty. NOTICE: Installation instructions must be followed. Any diversions from the installations may risk property damage and will void the warranty. IMPORTANT: Observe all state and local building codes. Carefully read all installation and care instructions before proceeding.
INSTALLATION AND CARE GUIDE 1. Mark your desired location with a pencil and placing mounting bracket on the ceiling (Making sure to use a level to insure it is straight). 2. Using a drill, drill pilot holes into the ceiling (if you are drilling into drywall be sure to use an anchor from your local hardware store). 3. Secure the bracket to the ceiling, use the provided mounting screws (wood only).
INSTALLATION AND CARE GUIDE 4. Connect the black wire from the lamp to the red wire (Insure to secure with the wire connectors provided). Connect the white wire from the lamp to the yellow wire (Insure to secure with the wire connectors provided). wire connector Black wire 5. Wrap the copper grounding wire around the green grounding screw several times. yellow wire Red wire wire connector white wire Copper grounding wire Green grounding screw 6.
INSTALLATION AND CARE GUIDE 7. Tighten the decorative cap nuts. Decorative cap nuts 9. Screw in the lightbulb (sold separately).
