Assembly Instruction Note: All parts are contained in one box. It is required that at least two people or more assemble this item.
Make sure it is assembled on a soft surface @ with no sharp objects underneath % 6 Step 1. Have the table top upside down with the holes facing up. Attach three table legs (B) onto the table top like the image above by aligning the holes on the leg to the table top. Make sure that the leg with holes to assemble the center ring are facing inwards into the table. Only assemble the three legs and do not tighten the bolts all the way Step 2. Attach the center ring (C) onto the three legs like the image above.
X2 Step 3. Attach the fourth leg like the image above. Note: do not tighten bolt all the way until all bolts are on Step 4. Lastly attach the last bolt for the center ring. Once all bolts are assembled, make sure that all bolts are tightened. Your table is now complete ! Carefully flip over the table with two people. If any spills occur please clean immediately.
