Installation & Assembly

STEP 4
STEP 5
Installation Guide
! IMPORTANT SAFETY INSTRUCTIONS
When installing or using the lighting system, basic safety precautions should always be followed
including the following:
1. It is highly recommended this installation should only be performed by a licensed electrician.
2. Read all instructions.
3. Before turning the power back on, make sure that the light system is clear of all material which
could cause a direct short and check all electrical connections to make sure they are right.
4. Caution - hot surface. Keep away from curtains and other combustible materials.
5. Lighted lamp is hot!
6. Turn off power and allow to cool before replacing bulb.
7. Lamp gets hot quickly! Only use a switch or plug when turning on.
8. Do not touch hot lamp lens.
9. Do not touch lamp at any time. Use a soft cloth. Oil from skin may damage lamp.
STEP 2
STEP 1
Please turn off the power at the breaker box. Test that the power is off at the ceiling
junction box with a circuit tester and read these instructions before electrical installation,
changing the bulb or cleaning the lamp. The electric installation must be performed by a
licensed electrician.
Secure the mounting hanger (1) to the electric junction box with the screws (2) and
washers (5) provided.
Connect the hot wire from main wire to the hot wire from power supply. Connect the
neutral wire from the main wire to the neutral wire from power supply. Fix the ground
wire from fitting to ground wire(grounding) from power supply.
Turn your power back on at the breaker box. Then check if the product turns on.
JUNCTION BOX
SCREWS (2)
BLACK (HOT)
WIRE CONNECTOR (3)
GROUND
WHITE (NEUTRAL)
MOUNTING HANGER (1)
CANOPY
JUNCTION BOX
DECORATIVE NUT SCREWS (4)
MOUNTING HANGER (1)
STEP 3
SCREWS (2)
WASHER (5)WASHER (5)
MOUNTING HANGER (1)
CANOPY
JUNCTION BOX
DECORATIVE NUT
SCREWS (4)
WIRE CONNECTOR (3)
Install the recommended bulb in the socket, and then install the canopy (shade/cover)
of the decorative fixture to the mounting hanger, using the supplied screws or
decorative nuts (4).
DECORATIVE NUT (4)
Parts component list
1x
1
2 3
2x +
1 extra
1 1/8"
3x +
1 extra
4
2x
1 1/8"
Legend
L = Line/Hot/Black
N = Neutral/White
= Ground/Green
5
2x +
1 extra