Installation & Assembly

 Page:  ‐3‐/4
4.1)Carefullypullthewiresfromoutletboxthroughmountingplate(B)
2)Attachthemountingplate(B)tooutletboxwithmountingscrews(D)














5.Makewireconnections
   Connectwiresasbelowwiresconnectingshown.TAKENOTEOFYOURWIRECOLOROFFIXTURE,NEVERCONNECT 
WIRETOGROUNDWIRE
ConnectgroundwireaccordingtobelowchartConnectwiresaccordingtobelowchart 










Twistplasticwireconnectoruntilwiresaretightlyjoinedtogether,wrapeachconnectorwithapprovedelectricaltapeand
carefullytuckallwiresintotheoutletbox


6.Gently push the fixture to wall, and carefully adjust the fixture
to make the holes on back plate (F) and mounting plate (B)are to be
aligned ,then thread the screws （E）to secure the fixture in
place
byscrewdriver