Installation & Assembly

 Page:  ‐2‐/4
TOOLSREQUIRED(NOTINCLUDED):
Beforedoingassemblyandinstallationpleasepreparetheneededtoolsasbelowpicture


PARTSTYPE&QTYINCLUDING: 
(B) Mounting plate (1)
(C)Green ground screw (1)
(E) Screw (2)
(F) Stud (3)
(G) Glass shade (1)

ACCESSORIES&QTYENCLOSED: 
(A)Plastic wire connector (3)
(D) Mounting screw (2)

ASSEMBLY&INSTALLATIONINSTRUCTIONS:

1. Carefullyremovethefixturefromthecartonandcheckthatallpartsand
accessoriesareincludedasshownintheaboveillustration
2.  Turnoffpower
3.1)Unscrewthestud(F)fromsocketcap 
  2)Installbulb(Notincluded.Pleasedonotexceedthemaximumcapacity 
recommendedonthesocket.)
3)Putglassontoscocketcap,thenromotetheglasstomaketheholesaretobe  
aligned,carefullythreadthestudstosecuretheglassinplace




