Installation Instructions

INSTALLATION INSTRUCTIONS
WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER.
Shut off the main power supply from the main fuse
box/circuit breaker.
1,Cut off the power before installation. Then adjust
the screws (3) on the junction box . Use the 2pcs
screws (1) to mount the siding (2) to the wall’s
junction box.
2,Connect the wires as the Fig 2 instructed.
3,Take the 2pcs screw nuts (5)to mount the plate(4)
on the screws (3).
4,Install a bulb. Connect the power, and lighting
installation completed.
Fig. 1
CONNECTING THE WIRES (Fig 2)
1. Attach the power supply wires to the fixture lead
wires by connecting BLACK to BLACK (or
SMOOTH) and WHITE to WHITE (or RIBBED).
2. Attach the GROUND wire(GREEN or COPPER)
from the Junction Box and the fixture Ground wire to
the green Ground Screw on the Mounting Bracket
(B) or connect both wires together using the correct
size of wire connectors.
NOTE: Twist the wires together in the same direction
you twist the wire connector onto the wires.
3. Tuck these wire connections neatly into the
Junction Box.
Fig. 2
For Customer Service, contact the place of purchase to arrange for replacement parts.
For Ceiling Mount Light Fixture