User Guide
Table Of Contents
- System Overview
- Receiver Safety Information
- Recycling Instructions
- Setting Up the PPA VP 37
- Locking Instructions
- Receiver Model PPA R37 Instructions
- Receiver Model PPA R37-8 (optional) Instructions
- Receiver Model PPA R38 (optional) Instructions
- Belt Clip Installation (all Receiver models)
- Using A Receiver With A Hearing Aid
- Receiver Management Suggestions
- Receiver Battery Information
- Troubleshooting Guide
- Personal PA Value Pack System Specifications
- Lifetime Limited Warranty
- Repair Services
PPA T27
19
PPA Select™ Receiver (Model PPA R37)
Dimensions: 4.1” H x 2.85 W x 1.38” D (104 mm x 72 mm x 35 mm)
Weight: 4.6 oz (130 g) with batteries, 2.6 oz w/o batteries (73g)
Color: Black
Battery Type and Life: Two (2) AA non-rechargeable alkaline batteries (BAT 001), approx. 50
hours battery life
Two (2) AA rechargeable NiMH batteries (BAT 026), 1500 mAh, approx 32
hours battery life
Current Consumption: Nominal 52 mA
Operating Freq.: 17 channels: 72.1, 72.2, 72.3, 72.4, 72.5, 72.6, 72.7, 72.8, 72.9, 74.7, 75.3,
75.4, 75.5, 75.6, 75.7, 75.8 or 75.9 MHz*.
FM Deviation: +75 kHz
De-Emphasis: 75 µS
LED Indicator: Power on: Bright Green. Low Battery: Flashes.
Sensitivity: 2 µV at 12 dB Sinad with squelch defeated
Input Overload: 100 mV
Frequency Response: 200Hz to 15 kHz, ± 3 dB
Signal-to-Noise Ratio: 65 dB at 100 µV
Receive Antenna: Integral with earphone/headphone cord
Audio Output: 35 mW, 16 ohm loadΩ
Output Connector: 3.5 mm stereo phone jack, accepts either stereo or mono plug
Approvals: FCC, Industry Canada, RoHS, WEEE
Warranty: Lifetime PLUS Limited Warranty; 90 on most other accessories
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.