Instructions / Assembly

REV.9/27/05 Page 5 of 7
2. The TS-3 has (2) 3 volt button cell batteries (1) button cell operates the LCD screen and the other button cell powers the PCB
board. If the button cell battery that controls sending the PCB board is low or defective the LCD screen may work but the PCB relay
may not close the contact (Check each button cell battery)
3. Check that the (2) male terminal connectors on the face are engaged in the female terminal connectors on the backing plate.
4. Check the wire connections to the TS-3 from the appliance that they are properly connected
SPECIFICATIONS
BATTERIES: TS-3 wired wall thermostat – 2ea. (CR2032) 3.0 volt lithium button cell batteries.
FOR TECHNICAL U.S. INQUIRIES
CANADIAN INQUIRIES
SERVICE, CALL: 888/672-8929 or 877-472-3923
260/459-1703
Website: skytechsystem.com
MANUFACTURED EXCLUSIVELY FOR SKYTECH II, INC