Owner`s manual

10 Aerovent IM-201

7.0 RECOMMENDED SPARE PARTS

7.1 GENERAL

Spare parts may be ordered either from your Aerovent

representative or directly from the factory. Prices will be

quoted at time of order. Delivery can generally be made from

stock. To order spare parts, specify:

1. Fan model number

2. Fan serial number

3. Part description

4. Part number

5. Quantity required

The fan model and serial number is on the fan nameplate.

7.2 FPAC SPARE PARTS

It is recommended that the following spare parts be

stocked to service FPAC fans:

Part Description Part No. Qty. Req’d

Positioner (Pilot Ass’y) F10046301 1

Rotary Union F10016701 1

Cable Assembly F20034902 1

7.3 FPMC SPARE PARTS

It is recommended that the following spare parts be

stocked to service FPMC fans:

Part Description Part No. Qty. Req’d

Electric Actuator Input Signal:

4-20MA F10103502 1

120 VAC F100165 1

7.4 TOOLS AND MATERIALS

Special tools and materials are available from the fac

tory to facilitate maintenance and repair of Aerovent fans.

These may be ordered by part description, part number, and

quantity required.

Part Description Part No. Qty. Req’d

Loctite Grade T Primer F10024401 6 oz. aerosol

Loctite 242 F10024402 100cc bottle

Loctite Stainless Steel PST F10024406 8.46 oz. tube

Gray Touch-up Paint P4332028 16 oz. aerosol

Tool, 8 mm hex x

∕8 F10024701 1

square adaptor for

AXICO blade shaft