product manual

Blower Accessory 2102
28
Operation
This accessory is operated using the factory equipped, three-prong (grounding) plug and cord. When using the plug and cord, for your
protection against shock hazard, it must be plugged directly into a properly grounded three-prong receptacle. DO NOT CUT OR
REMOVE THE PRONG.
You must select “HI” or “LO” on the speed switch (item 8) for automatic blower operation. When the heater heats up, the fan switch is
activated and the blower will operate. When the heater cools down, the blower will turn off. The blower will not operate if the speed
switch is set in the “OFF” (center) position.
Replacement Parts
Reference
Number
Part Number
Description
1
P501779 Motor
2
P323096 Fan Switch
3
K000862 Fan Switch Plate
4
90-01005-000-02 Junction Box
5
P501778 Cord and Plug
6
P202900 Wire (Red)
6
P202800 Wire (Black)
6
P202700 Wire (Blue)
7
K000862 Speed Switch Plate
8
P320911A Speed Switch
Not shown K000868 Switch Mounting
Bracket – 500 Series
K000870 Switch Mounting
Bracket – 650 Series
7
2
5
Air Inlet
Duct
Correct
position of
fan switch
Run switch
wire through
attached clamp
4
6
3
8
1
Attach clamp
to secure
wires