Installation guide

18
Multi–Channel Infrared Emitter, Model TX9
Dimensions, Weight: 11.25” W x 6.25” H x 2.125” D (28.6 cm x 15.9 cm x 5.4 cm), 1.9lbs (0.9 kg)
Color: Black with white legends, red acrylic lens
P
ower Supply: Wall Transformer, 24VAC, 50-60Hz, 35VA, 3-pin MOLEX Connector
North America: TFP 010, UL/CSA
Europe: TFP 027-01, 2-pin Schuko plug, CE
U
K: TFP 027-02, 3-pin UK plug, CE
Note: Each WIR TX9 requires its own power supply
Power Cable: NEC Class 2 wiring, two-conductor, 18 ga., 200’ (61m) max. length
I
ndicators: Green LED power indicator, red LED baseband indicator
Carrier Frequency: 50 kHz to 8 MHz
Emitter IR Power: 3.5 watts
C
overage Area: Up to 28,000 ft
2
(
2,600 m
2
)
in single-channel mode when using the RX22-4 Receiver
Up to 11,000 ft
2
(1,000 m
2
) in four-channel mode when using the RX22-4 Receiver
Up to 3,500 ft
2
(325 m
2
) in single channel mode when using the RX14-2 Receiver
U
p to 3,063 ft
2
(
285 m
2
)
in single channel mode when using the RX18 Receiver
(See coverage area diagrams)
Baseband Input: BNC, 100 mV per carrier, 50Ω, for use with WIR TX9 or MOD 232 only
Baseband Output: BNC, 50Ω, for use with TX9 only
Baseband Cable: RG 58 Coax, BNC connectors, maximum 1000’ (300m) length
Operating Requirements: 0-50º C ambient temperature, non-condensing, non-corrosive atmosphere
Mounting Kits: Wall or Ceiling Mount: BKT 024 Omnidirectional mount, Mic Stand Kit: SS-11 or SS-6
Warranty: 5 years on Emitter, 90 days on accessories
Approvals: CE, FCC, RoHS, WEEE
Compatible Receivers: WIR RX22-4 Four Channel Receiver, WIR RX14-2 Two Channel Receiver, RX18 Two-
Channel Receiver
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
Visit our website for the latest specifications and publications: www.williamssound.com