Installation guide

Williams Sound

Helping People Hear

shorter knob controls the microphone signal level. By adjusting the two volume controls, you

can hear a mixture of the transmitted signal and nearby sounds.

Note: Some users may not be helped by this system. Severe hearing loss may require

using the system with a telecoil coupler (i.e., Neckloop) and personal hearing aid.

USING A RECEIVER WITH A HEARING AID

Williams Sound PPA Receivers can be used with hearing aids using three different methods:

NECKLOOP TELECOIL COUPLER

Neckloops are cords which hang around the neck and couple magnetically with T-Coil

equipped hearing aids.

SILHOUETTE TELECOIL COUPLER

These telecoil couplers are worn behind the ear, right next to telecoil-equipped hearing aids.

DIRECT AUDIO INPUT (DAI) CORD

Direct Audio Input cords can be used with compatible hearing aids as well as with Cochlear

Implant Processors.