User manual

DLT 100 2.0 Digital Transceiver and DLR 60 2.0 Digital Receiver
21
1-way Setup for Simultaneous Interpretation
You are now at the beginning
of the programming. Press
and together for 3
seconds to exit programming
mode and return to the main
screen.
IMPORTANT
There can only be one master (oor) per group.
Channel icon will now begin
to blink Press ( + ) or ( - )
button to select a Channel
number 1 – 14. Transmitting
Channel must be set dierent.
( N/A with Main Speaker unit.
Set to CH 0 ).
Press POWER / MENU
button to enter Channel
number.
Group icon will now blink.
Press ( + ) or ( - ) button
to select a Group number.
Master and Slave units must
have same group number.
Press POWER / MENU
button to enter Group
number.
17 18
19
9 10
1211
Side-tone adjustment will
be displayed. Use the
buttons to
select a side-tone level
(0– 2).
Press
button to save
side-tone level and move to
the next setting.
13
14
16
15
The secure code screen
will now be displayed, with
the rst character blinking.
Use the
buttons
to select the rst number (
0 – 9).
Press button to
advance to the next position.
Repeat steps 17 and 18
until all numbers have been
entered. When the last
number has been entered,
nothing will be blinking.