User manual

DigiWave 300 Series Digital Transceiver and Receiver
23
Any DLT’s in 1-way Modes, or DLR’s, must be in the same Group. Each Listener would select a desired channel/language.
See below - when repeater mode is used, the main speaker’s unit is recongured as a Guest unit. The Repeater is congured as
the Master unit.
Main speaker (floor)
DLT 300’s FOR FLOOR AND INTERPRETERS
CH 0
CH 0
CH 1 CH 2 CH 3
... CH 14
CH 1 CH 2 CH 3
... CH 14
MASTER
GUEST REPEATERS
GUEST
CH 0
CH 1 CH 2 CH 3
... CH 14
DLT 300 [ LISTEN ONLY ] OR DLR 360
DLT 300 [ LISTEN ONLY ] OR DLR 360 MUST BE ON THE SAME GROUP. EACH LISTENER WOULD SELECT A DESIRED CHANNEL / LANGUAGE.
Note: When repeaters are not required, the Main Speaker (Ch. 0) will be the Master.