User manual

DigiWave 300 Series Digital Transceiver and Receiver
20
Example 3: Intercom (2, 3, 4, 5 or 6 simultaneous talkers)
HOW IT WORKS
1. There must be one primary “Master 1” unit per group (for synchronization).
2. Each secondary unit is set up as a “Guest”.
3. Up to six people can talk, and listen to each other, at the same time (6 Live mics).
4. In order to use this feature to it’s fullest, all units are programmed to be PnL, where the TALK button stays latched ON.
5. When a seventh talker wishes to speak, they push their TALK button, which knocks o the sixth talker. Six people are still
talking live, but now the seventh talker can speak, and the sixth talker just listens. This can continue for any number of talkers,
but only six can be talking (live) at the same time.
6. All units are operating in essentially a “2-way,” or “full-duplex” mode. However, the Intercom feature makes true 6-way
communication possible.
DLT 300
programmed as
Guest
DLT 300
programmed as
Guest
DLT 300
programmed as
Master 1
INTERCOM FEATURE
SUPPORTS UP TO SIX
SIMULTANEOUS TALKERS.
DLT 300
programmed as
Guest
DLT 300
programmed as
Guest
How it Works: 6-way Intercom
DLT 300
programmed as
Guest
Master Unit Guest Unit(s)