User manual

DWD 102 Digi-Wave™ Dual-Bay Docking Station
6
DWD 102 Specications
Dimensions
8.88” x 4.34” x 2.16" (226 mm x 110 mm x 55 mm) L x W x H
Shipping Weight
1.4 lbs (0.64 kg)
Enclosure
Black, heavy duty plastic molded top, with steel base and non-skid rubber feet. White legends on back.
DC Power Input
2.5mm ID barrel connector, 24VDC input, 750mA, Center Positive.
Power Supply
Williams Sound TFP 048.
Input: 100-240VAC 50/60Hz, 18W.
Output: 24VDC, 750mA.
Charging Time
DLT 100 2.0: 5 hours nominal (internal Lithium Polymer Battery)
*
DLR 60 2.0: 15 hours nominal, based on Williams Sound NiMH battery BAT 026-2.
Unit Capacity
2 Units: DLT 100 2.0, DLR 60 2.0, or DLR 60. DLT 100 units will charge only (no audio).
Indicators
Green LED indicating power at the charger/dock. Charging status is shown on unit being charged.
Rear Inputs
One set of L/R RCAs, single-ended, -10dBV typical, per bay.
One female XLR, balanced line-level, +4dBu typical, per bay.
Rear Outputs
One set of L/R RCAs, single-ended, -10dBV typical, per bay.
One male XLR, balanced line-level, +4dBu typical, per bay.
Dock Connector
One 30-pin connector per bay. Supports power/charging, audio in, audio out, and control signals.
Controls
One 2-position switch per bay, for “manual” or “auto” mode.
Warranty
2 Years
Approvals
FCC, CE, C√, Industry Canada, RoHS2, CB scheme, Energy Star V
*
Charging specications are based on internal rechargeable LiPo battery (not serviceable).
Specications subject to change without notice.
New batteries have various charge conditions, therefore, some DLT/DLR’s may take more or less time to fully charge. Charging
batteries generates heat. The receivers, transceivers, charger, and power supply may feel warm when charging. Do not charge
units in a closed enclosure, such as a carry case or brief case.