DWD 102 Digi-Wave™ Dual-Bay Docking Station DWD 102 Digi-Wave™ Dual-Bay Docking Station User manual Compatible with DigiWave™ Models DLT 100 2.0, DLR 60 2.
DWD 102 Digi-Wave™ Dual-Bay Docking Station System Overview Thank you for purchasing the DWD 102 Digi-Wave™ Dual-Bay Docking Station. The Digi-Wave™ Dock, when used with second-generation Digi-Wave 2.0 products, can be used to receive audio through a DigiWave™ receiver (or transceiver) and send the audio into a sound system, or send audio from a sound system to a transceiver for broadcast.
DWD 102 Digi-Wave™ Dual-Bay Docking Station Connectors and Controls Figure 1: Rear View Bay 2 XLR Line Input Bay 2 RCA Line Inputs Bay 2 Bay 1 XLR RCA Auto/ Auto/ XLR Line Manual Manual Line Line Output Outputs Switch Switch Input Bay 2 Bay 2 Bay 2 Bay 1 Bay 1 Power Supply Connector RCA Line Inputs Bay 1 XLR Line Output Bay 1 RCA Line Outputs Bay 1 A478 Figure 2: Top View Bay 1 Power Indicator LED 3 Bay 2
DWD 102 Digi-Wave™ Dual-Bay Docking Station Setup Instructions: 1. Connect the external devices to the XLR or RCA jacks on the back of the Digi-Wave™ Dock (Figure 1). Both RCA and the single XLR input jacks are all mixed internally - but for proper mixing to occur at the output without any adjustments, the following combinations can be used: One single RCA jack by itself, both RCA jacks, the XLR jack by itself, or both RCA jacks and the XLR jack.
DWD 102 Digi-Wave™ Dual-Bay Docking Station DLT microphone mixing with dock sources The dock’s inputs - two mono RCA jacks (-10dBV) and one XLR jack (+4dBu) - are mixed together in the dock, then sent to the DLT 100 2.0. The DLT 100 2.0 then mixes the dock audio with it’s microphone before transmitting. Depending upon what sources are being mixed, there may be a level mismatch between the dock and the DLT’s microphone level. The DLT 100 2.0 includes line-level adjustment for proper mixing.
DWD 102 Digi-Wave™ Dual-Bay Docking Station DWD 102 Specifications Dimensions 8.88” x 4.34” x 2.16" (226 mm x 110 mm x 55 mm) L x W x H Shipping Weight 1.4 lbs (0.64 kg) Enclosure Black, heavy duty plastic molded top, with steel base and non-skid rubber feet. White legends on back. DC Power Input 2.5mm ID barrel connector, 24VDC input, 750mA, Center Positive. Williams Sound TFP 048. Power Supply Input: 100-240VAC 50/60Hz, 18W. Output: 24VDC, 750mA. Charging Time DLT 100 2.
DWD 102 Digi-Wave™ Dual-Bay Docking Station Troubleshooting No audio transmitted from docked DLT 100 2.0: 1. Make sure the DLT (or DLR) is seated firmly on the dock’s 30-pin connector. 2. Make sure the dock and DLT are powered ON. 3. Check the source input into the dock - make sure it is connected, powered on and playing/producing audio. 4. Verify that the incoming audio level is sufficient. 5. Make sure the TALK button red ring light is ON on the DLT. 6.
DWD 102 Digi-Wave™ Dual-Bay Docking Station 2-Year Warranty Williams Sound products are engineered, designed and manufactured under carefully controlled conditions to provide you with many years of reliable service. Williams Sound warrants the DWD 102 Digi-Wave™ Dual-Bay Docking Station against defects in materials and workmanship for TWO (2) years. During the first 2 years from the purchase date, we will promptly repair or replace the DWD 102.
