Owner`s manual
7
CONNECTOR PANEL
The connector jacks are located on the rear panel
of the piano.
( )
MIDI Out / MIDI In
TheAllegroprovidesMIDIINandMIDIOUT
ports.MIDIjacksallowcommunicationwithother
productsequippedwithMIDIinterfaces.Pleasesee
theMIDIFunctionssection(pg.17)ofthismanual
for further details.
Sustain Pedal
ThefootpedalincludedwithyourAllegrowillcause
piano key sounds to decay slowly as if they were being
helddown.Apiano-stylepedalmayoptionallybe
used. The jack will auto-detect the polarity of the
sustain pedal.
Stereo/ Mono Line Out
The output jacks supply a line-level signal for external
amplification. Use both jacks for stereo or just the
Left jack for mono.
Phones
The Phones jack allows playing in silence. When
headphones are plugged in, the speakers are mute
DC 12V Input
Connection for the included DC power adapter.
Please use only the provided adapter.
NOTE: After 10 seconds the [DATA CONTROL]
knob will revert to its default function of controlling
metronome tempo.
PANEL CONTROLS
A
Power On/Off
Depress the [POWER] button in the upper left corner
of the front panel. It will remain in when the power
is on and will return to its extended position when
the power is off.
B
Master Volume
Slide the control to the left to lower the speaker
volume, or to the right to increase it.
C
Function
TheFunctionbuttontransferstheAllegrotoEdit
mode, enabling the modification of the parameters of
many features such as touch sensitivity, splits, layers
andMIDIcontrol,amongothers.
D
LED Display
The LED will display the appropriate status, function,
value, voice or mode for the current operation.
E
Data Control Knob
The[DATACONTROL]knobchangesparameter
values for voice, function, volume (0-127),
metronometempo(20-280),reverb/chorusdepth
(0-127), time signature, transpose value (-12 - +12),
octavesetting(-3-+3),MasterTuningsetting(-64
-+63),track,MIDIchannel/programnumberand
BankMSB/LSBvalues(0-127).
DATA CONTROL
9386 Williams Allegro manual_CS5.indd 7 12/3/10 4:02 PM