Owner`s manual

29
Piano Reset
ActivatingthePianoResetfunction(pressing
the[TRANSPOSE]and[OCTAVE]buttons
simultaneously), will perform the following
functions:
PIANO
RESET
TRANSPOSE OCTAVE
• Turn Local On
• Send“AllNotesOff”commandonMIDI
Channel 1 - external and to the internal
sound engine
• Send“ResetAllControllers”command
onMIDIChannel1-externalandtothe
internal sound engine
• Assign[DATACONTROL]toVoiceVolume
• SetVolumelevelsforMainVoice,Split
VoiceandLayerVoicetodefaults
• SetPanto64forMainVoice,Split
VoiceandLayerVoice
• TurnoffLayerModeandSplitMode
• SetMainMIDITransmitChannelto1
• Set Transpose and Octave Shift both
back to zero
• SendaProgramChange=0onChannel1
• SendaBankChangeMSB=0andBank
ChangeLSB=0onChannel1
• Set the Reverb Depth back to the default
valuefortheDefaultVoice
• SendChorusDepth=0onChannel1
• Send the current status of the Sustain
Pedal on Channel 1
APPENDIX C
Piano Resets
Factory Reset
Performing a Factory Reset will clear all battery
backed memory and restore all functions to factory
defaults.
Please note that anything you have recorded in the
Song Recorder will be erased by this procedure!
REVERB CHORUS
• Turn the Power Off.
• Holddownthe[REVERB]and[CHORUS]
buttons while powering on the piano (The
LEDDisplaywilllightALLsegmentsand
all LEDs on the device will light).
• Releasethe[REVERB]and[CHORUS]
buttons.
TheAllegrowillreturntoPerformanceMode
(ready-to-play).AllbuttonLEDswillreturnto
their default state.
The LED Display will show the version number
of the firmware (internal operating software) for 2
secondsandthenreturntoshowingtheVoiceName
(GrandPiano):PNO.
9386 Williams Allegro manual_CS5.indd 29 12/3/10 4:02 PM