Owner`s manual

26
APPENDIX A
Default Settings
The table below shows the piano factory default settings and whether or not user changes to these settings are
retained after a power-cycle (turning the device off and on).
Atpower-on,thefollowingMIDIdatawillbesenttothesoundengine,theUSBMIDIandtheMIDIOut:
1.BankChangeMSB=0,LSB=0,PGM=0-setsoundenginetopianovoice
2. Reverb default value
Parameter Factory Default Retained on Power-Down
ProgramNumber&VoiceSelected 000-GrandPiano No
BankMSBNumber 000 No
Bank LSB Number 000 No
MainMIDITransmitChannel Channel 1 No
Octave shift 0 No
Transpose 0 No
Local On No
[DATACONTROL]Assignment Data=Tempo Yes
Reverb On/Off Reverb On Yes - store for each sound
Reverb Depth Defaults for each sound Yes - store for each sound
Chorus On/Off Chorus Off Yes - store for each sound
Chorus Depth Defaults for each sound Yes - store for each sound
VelocityCurveSelected NORMAL Yes
Split Point B2 Yes
VoiceVolume 127 No
LayerVolume 100 Yes
SplitVolume 127 Yes
MetronomeVolume 127 Yes
MasterTune 0 Yes
Tem p o 120 Yes
LayerModeVoice n/a n/a
SplitModeVoice 8-UprightBass Yes
LayerModeOn/Off Off No
SplitModeOn/Off Off No
9386 Williams Allegro manual_CS5.indd 26 12/3/10 4:02 PM