Owner`s manual
22
B1
DATA CONTROL
TheAllegroisnowbackinPerformanceModeand
the[DATACONTROL]knobhasbeenassignedto
sendBankMSBvalues.
NOTE: this is different than the Bank MSB Key (B5)
that you used to input a single Bank MSB value.
AMIDIBankMSBchangewillbesentouteachtime
the[DATACONTROL]knobisturned.(Seethe
sectiononMIDIFunctionsformoreinformation.)
TheLEDdisplaywillshowtheBankMSBvalue
(between 0 and 127) as you turn the knob.
Sending Bank LSB Changes
There are two ways to send Bank LSB changes. You
may either enter a specific LSB (Least Significant
Byte) value using the Numeric Data Entry Keys, or
youmayassignthe[DATACONTROL]knobtosend
Bank LSB changes. (Please note that after any kind of
bank message, it is usually necessary to follow up with
aMIDIProgramChangemessageinordertoaffecta
sound change on the receiving device.)
ToSendaSpecicBankLSBValue[DATA
CONTROL] knob assignment remains unchanged):
• Press the [FUNCTION] button to enter
EditMode.
• PresstheBankLSBKey(A5).
• Using the Numeric Data Entry keys, enter the
Bank LSB value you want to send.
FUNCTION
Cancel
Panic
Data Contr Assign
Bank MSB
Bank LSB
Program
Default
9
8
7
6
5
4
3
2
1
0
Enter
Numeric Data Entry Keys
Cancel
Panic
Data Contr Assign
Bank MSB
Bank LSB
Program
Default
9
8
7
6
5
4
3
2
1
0
Enter
A5
• PresstheEnterKey(C7)tosendtheMIDI
command.
Toassignthe[DATACONTROL]KnobtoSendBank
LSB Changes:
• Press the [FUNCTION] button to enter Edit
Mode.
• PresstheBankLSB[DATACONTROL]Key
(A1).
• The LED display will momentarily show: LSB.
A1
DATA CONTROL
TheAllegroisnowbackinPerformanceModeand
the[DATACONTROL]knobhasbeenassignedto
sendBankMSBvalues.
NOTE: This is different than the Bank LSB Key (A5)
that you used to input a single Bank LSB value.
AMIDIBankLSBchangewillbesentouteachtime
the[DATACONTROL]knobisturned.
The LED display will show the Bank LSB value
(between 0 and 127) as you turn the knob.
9386 Williams Allegro manual_CS5.indd 22 12/3/10 4:02 PM