Owner`s manual

21
Cancel Panic Data Contr Assign Bank MSB Bank LSB Program
Default
9 8 7 6 5 4 3 2 1 0
Enter
FUNCTION
Cancel Panic Data Contr Assign Bank MSB Bank LSB Program
Default
9 8 7 6 5 4 3 2 1 0
Enter
F
#
5
Toassignthe[DATACONTROL]knobtosendMIDI
Program Changes:
Pressthe[FUNCTION]buttontoenterEditMode.
PresstheProgramNumber[DATACONTROL]Key
(F#1) The LED display will momentarily show: PGN.
FUNCTION
Data=Voice Sel Data=Channel Data=Bank MSB Data=Bank LSB Data=Program Data=Time Sig Data=Metro Vol Data=Split Vol Data=Voice Vol Data=Layer Vol
C0 C1 C2
F
#
1
TheAllegroisbackinPerformanceMode,andthe
[DATACONTROL]knobhasbeenassignedsothata
MIDIProgramChangewillbesentouteachtimethe
knob is turned.
The LED display will show the currently selected
MIDIProgramNumber(0-127).
NOTE: This is different than the Program Key (F
#
5)
that you used to input a single MIDI Program
Number value.
Sending Bank MSB Changes
TherearetwowaystosendBankMSBchanges.You
mayeitherenteraspecicMSB(MostSignicant
Byte) value using the Numeric Data Entry Keys, or
youmayassignthe[DATACONTROL]knobtosend
BankMSBchanges.
NOTE: After any kind of bank message, it is usually
necessary to follow up with a MIDI Program Change
message in order to affect a sound change on the
receiving device.
ToSendaSpecicBankMSBValueUsingthe
Numeric Data Entry Keys:
• Press the [FUNCTION] button to enter
EditMode.
• PresstheBankMSBKey(B5).
• Using the Numeric Data Entry keys, enter
theBankMSBvalueyouwanttosend.
• Press the Enter Key (C7) to send the
MIDIcommand.
• Toassignthe[DATACONTROL]Knobto
SendBankMSBChanges:
• Press the [FUNCTION] button to enter
EditMode.
• PresstheBankMSB[DATACONTROL]
Key (B1).The LED display will
momentarily show: NSB.
9386 Williams Allegro manual_CS5.indd 21 12/3/10 4:02 PM