Owner`s manual

19
Enter Key (C7)
WhenenteringdatainEditMode,pressingtheEnter
key will cause the selected data to be sent to this
pianoasaMIDIcommand.AfterpressingtheEnter
key,theAllegrowillreturntoPerformanceMode.
Cancel Panic Data Contr Assign Bank MSB Bank LSB Program
Default
9 8 7 6 5 4 3 2 1 0
Enter
Numeric Data Entry Keys
Cancel Key (B

6)
Pressing the Cancel key at any time while in Edit
ModewillexitEditModeandreturntheAllegroto
PerformanceMode.Settingswillremainunchanged.
Cancel Panic Data Contr Assign Bank MSB Bank LSB Program
Default
9 8 7 6 5 4 3 2 1 0
Enter
B6
Data Conrol Assign Key (C
#
6)
Pressingthe[DATACONTROL]Assignkeywhilein
EditModewillallowyoutosendMIDIContinuous
Controller command values using the Data
Control knob.
Toassignthe[DATACONTROL]knobtosendMIDI
Continuous Controller command values:
Pressthe[FUNCTION]buttontoenterEditMode.
FUNCTION
Pressthe[DATACONTROL]Assignkey(C#6).
Cancel Panic Data Contr Assign Bank MSB Bank LSB Program
Default
9 8 7 6 5 4 3 2 1 0
Enter
C#6
Using the Numeric Data Entry keys, select the
Continuous Controller number you wish to assign
tothe[DATACONTROL]knob.
DATA CONTROL
Cancel Panic Data Contr Assign Bank MSB Bank LSB Program
Default
9 8 7 6 5 4 3 2 1 0
Enter
Numeric Data Entry Keys
Press the ENTER key (C7).
TheAllegroisnowbackinPerformanceModeand
[DATACONTROL]knobmaybeusedtosendvalues
for the Continuous Controller (CC) number assigned
tothe[DATACONTROL]knob.
DATA CONTROL
Panic Key (F
#
6)
PressingthePanickeywillsendout“ResetAll
Controllers”and“AllNotesOff”MIDImessageson
ALLMIDIChannels(1–16).Thiscanbeespecially
useful for clearing “stuck notes” when controlling
externalMIDIdevicesorsoftware.
To send the messages, press the [FUNCTION] button
toenterEditMode.
Press the Panic Key (F#6).
9386 Williams Allegro manual_CS5.indd 19 12/3/10 4:02 PM