Owner`s manual

18
Turn Local On/Off to Off
• Press the [FUNCTION] key to enter
EditMode
• Press the Local On/Off key (C#3). The LED
display will show: OFF.
Turn Local On/Off to On
Repeat the above procedure. The LED display will
show: ON.
C#3
C2
C1
C0 C3
Main MIDI Transmit Channel (C
#
2)
ThemainMIDItransmitchannelnumbermaybe
changed as necessary by increasing or decreasing the
channel number.
Change the Main MIDI Transmit Channel
• Press the [FUNCTION] button to enter
EditMode.
• PresstheMIDITransmitChannelKey(C#2)
tosetthe[DATACONTROL]knobtoincrease
ordecreasetheMainMIDITransmitchannel
number. The LED Display will momentarily
show: CHA.
• Usethe[DATACONTROL]knobtoselectthe
desiredMainMIDITransmitChannel.
DATA CONTROL
C#2
C2C1
C0
FUNCTION
NOTE: The MIDI channels used for the Split and Layer
voices are relative to the Main MIDI Transmit Channel,
in the following ways:
Split Voice Transmit Channel:
Main MIDI Transmit Channel +1
Layer Voice Transmit Channel:
Main MIDI Transmit Channel +2
Numeric Data Entry Keys
(G5,A5,B5,C6,E6,F6,G6,A6,B6)
SeveraloftheadvancedMIDIeditingfunctionsof
this piano require that a numeric value be entered.
This may be accomplished using the Numeric Data
Entry Keys.
Functions requiring numeric input include:
• Program Change
• BankMSB
• Bank LSB
• [DATACONTROL]Assign
These features are discussed below.
DATA CONTROL
Cancel Panic Data Contr Assign Bank MSB Bank LSB Program
Default
9 8 7 6 5 4 3 2 1 0
Enter
Numeric Data Entry Keys
NOTE: If preferred, the [DATA CONTROL] knob
may also be used to scroll to the desired numeric value,
instead of using the Numeric Data Entry Keys.
9386 Williams Allegro manual_CS5.indd 18 12/3/10 4:02 PM