Owner`s manual

16
EDIT FUNCTIONS
InEditMode,thefunctionofthe[DATACONTROL]
knob is changed to specify a number of different
values.The[DATACONTROL]knobwill"timeout"
after 10 seconds and return to default metronome
tempo.
Keyboard control keys are used to select the
functionuponwhichthe[DATACONTROL]knob
will have an effect.
Use of Function Key
Please refer to the appropriate sections earlier in this
manualforproperuseofthe[DATACONTROL]
knobwheneditingtheMetronome,Layer,Split,
TransposeandOctavefunctionsoftheAllegro.
Master Tuning
TheAllegroistunedtoA440whenthepoweris
turned on and does not require tuning. However, if
desired, in order to play along with other instruments
or recordings that are tuned differently, the tuning
maybeadjustedinsemitoneincrementsfrom-64to
+63 (One full tone).
TochangetheMasterTuning:
• Press the [FUNCTION] key to enter
EditMode
• Press the F
#
2keytoselectthe[DATA
CONTROL]knobtotheMasterTuning
Function. The LED will show: TUN.
• Turnthe[DATACONTROL]knobtothe
desiredvalue(-64-63).
NOTE: Master tuning must always be manually
adjusted back to -0-.
F#2
C0 C1 C2
Touch (Sensitivity)
TheTouchSelectfunctionallowsthechoiceof4
sensitivity settings or velocity curves which determine
how the force with which you hit the keys affects the
volume of the notes played. This piano provides you
with four different keyboard sensitivity options:
Normal(A
3 key): This is the default setting and
should work well for most players who play with an
average amount of force. When selected, the LED
display shows: NOR.
Low (F
#
3 key): This setting generates lower
velocity values for the same force and is useful for
playing more quietly, even with a heavy touch.
When selected, the LED display shows: LO.
High (B
3 key): The high setting generates higher
velocity values for the same force and is useful for
playing more loudly, even with a light touch. When
selected, the LED shows: HI.
Fixed (F3 key): This setting effectively disables
sensitivity control. The keyboard will generate a
fixed velocity value of 100 (on a scale of 0-127)
regardless of how hard or soft you play. When
selected, the LED display shows: FO.
To Set the Keyboard Sensitivity:
Depress the [FUNCTION] button to enter Edit
Mode.PressthedesiredTouchSelectkey(Ab3,F#3,
Bb3, F3). The LED display will show the selected
touch setting.
9386 Williams Allegro manual_CS5.indd 16 12/3/10 4:02 PM