Owner`s manual

15
RECORD
SONG METRONOME
Turnthe[DATACONTROL]knobuntiltheLED
displays: CLR.
DATA CONTROL
Beginplayingthekeyboard.Allpreviouslyrecorded
data on tracks 1 and 2 will be cleared, and the notes
you are now playing will be recorded on track 1.
To clear all data on tracks 1 and 2 without
recording anything new, after step 2, press the
Song button twice.
SONG
YouwillthenbebackinPerformanceMode,with
all data cleared from the Song Recorder.
NOTE: the Clear function always erases recorded
notes from both tracks. For instructions on how to
erase data from only one of the two tracks, please
read the earlier section, To Erase a Single Track
in the Song Recorder.
To Play Back Your Song Recorder Tracks:
FromPerformanceMode,pressthe[SONG]button
toenterSongPlayMode.
SONG
Usethe[DATACONTROL]knobtoselectoneof
the following:
DATA CONTROL
SNG: Playback of both of the Song Recorder
tracks simultaneously.
TR1: Playback of Song Recorder track 1.
TR2: Playback of Song Recorder track 2.
Pressthe[SONG]buttontostartplayback.
While the Song is playing, the LED display will
show: PLY.
SONG
NOTE: If there is nothing recorded on either of the
tracks (1 or 2), then the Song will not play. Rather,
the Song LED will flash 3 times quickly, and the piano
will exit Song Play Mode and resume Performance
Mode, with the LED display showing the currently
selected voice.
To Stop Playback and Exit Song Play Mode:
Press the Song button. Song playback will stop,
andthepianowillexitSongPlayModeandresume
PerformanceModewiththeLEDdisplayshowing
the currently selected voice.
SONG
9386 Williams Allegro manual_CS5.indd 15 12/3/10 4:02 PM