Owner`s manual

11
Change the Split Point
Press and hold the [SPLIT] button for 1 second, then
press the appropriate piano key.
Change the Split (left hand) voice
Press and hold the [SPLIT] button while depressing
thedesiredVoiceSelectbutton.
Change the Main (right hand) voice
ExitSplitModebypressingthe[SPLIT]buttonagain,
select the appropriate voice and then press [SPLIT]
again to re-enter Split mode.
SPLIT
Change the Split volume (left hand)
• Press the [FUNCTION] button to enter Edit
Mode.PresstheB
0keytoassignthe[DATA
CONTROL] knob to the Split (left hand)
VoiceVolumefunction.
• Turnthe[DATACONTROL]knobtothe
desired value (0-127) while striking any
keyboard key to hear the effect.
FUNCTION
Bo
C0 C1 C2
Change the Split volume (right hand)
• Press the [FUNCTION] button to enter
EditMode
• Press the F
#
0keytoassignthe[DATA
CONTROL]knobtotheMain(righthand)
VoiceVolume.TheLEDwillshow:UO1
• Turnthe[DATACONTROL]knobtothe
desired value (0-127) while striking any
keyboard key to hear the effect.
F
#
0
C0 C1
FUNCTION
Turn Off Split Mode
Press the [SPLIT] button. The LED will momentarily
display off, then the currently selected voice.
SPLIT
Split Mode MIDI Considerations
TheMain(righthand)Voicewilltransmitonthe
MainMIDItransmitchannel.TheSplitVoicewill
transmitontheMainMIDItransmitchannel+1.
SeeMIDIFunctionsforcompleteMIDI
information (pg. 17).
Transpose
The Transpose function will raise or lower the
pitch of the keyboard in semitone increments
from -12 to +12.
ToturnTransposeon,pressthe[TRANSPOSE]
button. The LED will display: TRA. Now use the
[DATACONTROL]knobtoselectthedesired
transpose value.
DATA CONTROL
TRANSPOSE
Optionally, the transpose value may be specified
byholdingdownthe[TRANSPOSE]buttonand
pressingakeyboardkeybetweenC2andC4,
thereby selecting the value indicated below:
9386 Williams Allegro manual_CS5.indd 11 12/3/10 4:02 PM