User guide

WML Linux Thin Client User Guide

Technical Data

Connectivity Ports

The unit comes with four USB V1.1 ports for this particular model. You can use one or all

simultaneously for keyboard and mouse or other peripherals.

Powering on/off

The on/off button is the sole means for powering the unit on or off. When the on/off button is pressed

while the unit is powered on, the WML Linux Thin Client will go into shutdown mode and will power

off after about 3 seconds. If the unit fails to power off, hold the on/off button down for 10 seconds.

Monitors

The WML Linux Thin Client requires that the connected monitor provides the DDC protocol which

allows the graphics software to determine the available resolution and frequency settings for the

monitor. Most modern monitors are DDC compliant.

page 6/62