User guide

WML Linux Thin Client User Guide
Display
The display resolution tab presents a menu of supported resolutions and refresh rates. These are
determined from your monitor using a DDC query.
If you wish to change the display resolution, choose the new setting and click “Apply”. If the box is
checked (“Display settings above should be retained between reboots”), then the next time the WML
Linux Thin Client boots, it will not automatically detect the optimum monitor resolution but will run
your chosen resolution.
If you want to return the WML Linux Thin Client to checking automatically for resolution, simply
uncheck the box. This can be useful when preparing a settings.tar file to implement remote
management for a fleet of clients.
page 51/62
Copyright © 2008 William Matthew Limited. All rights reserved
Illustration 47: The "Display" tab of the Setup Manager