User guide

WML Linux Thin Client User Guide

NoMachine NX

Create a new connection of type Nomachine NX. The NoMachine NX Connection Details window

will appear with the “Network” Tab pre-selected. This window provides an interface to create the NX

session . When the session is launched, NoMachine's own NX Client program is used to launch the

connection.

NoMachine NX: Network Tab

The NoMachine NX Connection Details window has fields for the connection name and the network

details – server address, port, username etc. You can also select a number of options to control how

the NX connection behaves.

In Connection Name, enter the name of the connection, as you want it to appear in the Connection

Manager. The Connection Name may include spaces, but none of the characters: " ' = , . ; :

/ \.

In the address field, enter either the network name or the IP number of the NX server. The port to

connect to is usually the same as the SSH port (22) but this is not always the case. Enter the username

for the connection and check the checkbox if the password should be stored on the thin client between

reboots. If stored, it will be kept in hashed form in the connection's .nxs file.

page 19/62

Illustration 17: Entering network details for Nomachine NX connection