User guide

WML Linux Thin Client User Guide

Configuration Tab – Overview

The Configuration tab is password protected and is intended for the use of administrators. Illustration

12 shows the Configuration tab with the same connections configured as in Illustration 10

The features of the Configuration tab are:

1. The “Name” field shows the name of the connection, as given by the administrator.

2. The “Type” field shows the connection protocol.

3. If the “At boot?” field is checked, the connection will be launched when the WML Linux Thin

Client powers up. You can check and uncheck this field without opening the Connection

Details window for the connection.

4. The “New” button is used to create a new connection.

5. The “Edit” button is used to edit an existing connection (highlight the connection then press

“Edit”).

6. The “Delete” button is used to delete a connection. Note that a running connection may not be

deleted – first shut it down, then highlight its entry in the list and press the “Delete” button.

7. The “Setup” button launches the Setup Manager. This has the same effect as pressing the F2

key.

8. The “ICA Settings” button opens a window to configure certain settings which are used by the

Citrix ICA client program for all ICA connections.

9. The “Logout” button ends your use of the Configuration tab. Once you have logged out, to

add, edit or delete connections, you'll need to re-enter your password.

page 15/62

Illustration 12: An overview of the Configuration tab of the Connection Manager