User Guide
PAGE 2 (May 2021)
2. Open the Wi-Fi Settings on your smartphone, and
select a network with the SetupGateway_XXXX SSID
3. Open the Wiliot app, Tap on the Settings icon.
You need to follow the instructions in this section if you are using the battery-free version of the Wiliot stickers. These
instructions are equivalent between iOS and Android devices. In this guide, we are using the Fanstel BWG840XE as reference
Works With Wiliot gateway device. The Fanstel BWG840XE supports a 2.4 GHz-only 802.11 b/g/n. Please make sure your local
Wi-Fi has a 2.4 GHz SSID network available for joining devices.
1. Power on the BWG840XE plugging the USB cable connected to a wall power supply (left image). Set it into Access Point (AP)
mode performing a physical reset of the gateway, insert a paperclip into the small hole on the side until thered LED turns on and
then off (right image).
Works With Wiliot Gateway Provisioning
Connecting the gateway to your local Wi-Fi