Datasheet
Lesson 01 | Primitives
PROjECT 01 | LESSON 01 | PRIMITIVES
67
L01_025_drape.tif
The shape of the drape
Tip: You might want to go into wireframe mode (hotkey 4), in order to select
components more easily.
From the • Perspective view, RMB on the drape and select Hull.
Hulls dene a continuous line of CVs. By selecting a hull, you can tweak the shape of several
CVs at the same time.
Click on the rst hull along the length of the drape, then hold down the • Shift key and
select the opposite hull.
Use the • Move Tool to move the hulls up on their Y-axis.
Doing so will give a nice dangling look to the drape.
Place the drape correctly
5
Go back in • Object mode.
Rotate• the drape so it is aligned with a column.
Tweak• the shape of the drape in Component mode as needed so the drape almost
touches the column.
From the • side view, click+drag to select groups of CVs and tweak the shape of the
drape as follows: