Datasheet

30
|
CHAPTER 1 The Basics of auTocaD civil 3D
Re-creating a Deed Using Line and Curve Tools
This exercise will help you apply some of the tools you’ve learned so far to reconstruct the over-
all parcel that will be used as the sample exercises for the majority of the book.
From Point of Beginning
South 44 degrees 54 minutes 15 seconds West 68.64 feet to a point
North 07 degrees 05 minutes 24 seconds East 217.80 feet to a point
North 72 degrees 12 minutes 10 seconds East 4.23 feet to a point
North 05 degrees 53 minutes 27 seconds East 201.09 feet to a point
South 86 degrees 32 minutes 10 seconds East 121.22 feet to a point
North 03 degrees 25 minutes 51 seconds West 168.78 feet to a point
North 14 degrees 38 minutes 58 seconds East 283.16 feet to a point
North 07 degrees 19 minutes 22 seconds West 79.64 feet to a point
North 07 degrees 04 minutes 00 seconds West 205.45 feet to a point
South 46 degrees 24 minutes 36 seconds West 121.05 feet to a point
South 48 degrees 31 minutes 20 seconds West 414.66 feet to a point
North 49 degrees 29 minutes 56 seconds West 50.80 feet to a point
North 48 degrees 37 minutes 57 seconds East 150.29 feet to a point
North 05 degrees 39 minutes 50 seconds East 497.28 feet to a point
North 84 degrees 20 minutes 01 seconds East 290.33 feet to a point
North 05 degrees 20 minutes 48 seconds West 195.08 feet to a point
North 76 degrees 46 minutes 10 seconds East 701.96 feet to a point
South 23 degrees 42 minutes 48 seconds East 130.68 feet to a point
South 20 degrees 13 minutes 35 seconds East 526.50 feet to a point
South 76 degrees 04 minutes 14 seconds West 379.96 feet to a point
South 13 degrees 22 minutes 41 seconds East 320.08 feet to a point
South 12 degrees 36 minutes 45 seconds East 159.86 feet to a point
South 12 degrees 21 minutes 15 seconds East 274.32 feet to a point
South 61 degrees 15 minutes 09 seconds West 272.81 feet to a point
North 06 degrees 15 minutes 30 seconds West 131.45 feet to a point
South 72 degrees 12 minutes 22 seconds West 301.60 feet to a point
South 06 degrees 58 minutes 04 seconds East 206.04 feet to a point
Returning to Point of Beginning
The resulting enclosure should be: 26.25 acres (more or less)
Follow these steps:
1. Open the Deed Create Start.dwg file, which you can download from this book’s web
page at www.sybex.com/masteringcivil3d2012.
2. Turn off Dynamic Input by pressing F12, or by toggling the icon off at the status bar.
3. From the Draw panel on the Home tab, select the Line drop-down and choose the Create
Line By Bearing command.
4. At the Select first point: prompt, select any location in the drawing to begin the
first line.
5. At the >>Specify quadrant (1-4): prompt, enter 3 to specify the SW quadrant, and
then press ↵.
016817c01.indd 30 5/24/11 10:17:45 AM