Datasheet

Chapter 1
36
3. Once you have done this, you can also set the following form properties:
Scroll Bars Neither
Record Selectors No
Dividing Lines No
4. Now you can add the first of your own navigation buttons. We'll start by creating a
Next Record button.
5. Check that the Toolbox is visible. If it isn't, then click the Toolbox button on the toolbar:
6. Then, make sure the Control Wizards button isn't depressed (that's the one in the
toolbox with the magic wand on it), and select the Command Button tool from the
toolbox. This will allow us to place a command button on the form: