Datasheet

42
Part I ✦ SUSE Linux Basics
Graphics Card Configuration
As you have changed the resolution of your monitor, you will also need to change
the resolution of your graphics card to reflect the monitor settings. To do this, click
on the resolution (in Figure 1-30, this is 800 × 600). You will be presented with a
small drop-down box asking you for the resolution you wish to run X with (see
Figure 1-32).
Configuring Your Sound Card
YaST will detect the sound card and will set it up automatically. During a standard
installation, you are not required to intervene in this process; it just happens. In
almost all cases, that is all you need to know. The rest of this section concerns what
you can do after installation if it turns out that sound was not configured correctly
during the installation.
Figure 1-32: Graphics card resolution
06_754889 ch01.qxp 12/27/05 7:05 PM Page 42