Datasheet

8
c h a p t e r 1: PREPARING DRAWINGS IN CAD OR BIM FOR ENHANCEMENT ■
Figure 1.7 Specifying pixel dimensions for the custom paper size
Figure 1.8 Naming the custom paper size
It is now time to limit the color depth that your ImagePrinter driver uses so you
can create images with black and white pixels only. This will make smaller image files
and save hard drive space. Follow these steps:
16. Expand the Graphics node in the driver hierarchy and click the Vector Graphics
node.
17. In the Color Depth group, click the Monochrome radio button, and then choose
2 Shades Of Gray from the Color Depth drop-down, as shown in Figure 1.9.
18. Click OK to close the Plotter Configuration Editor.
Note: The name ImageSize is referenced in the AutoLISP program used later in this chapter. It is important
that you use this name exactly.
916568c01.indd 8 11/21/10 10:42:20 PM