Datasheet

Chapter 1

Installing Windows 7
30
During the Installing Windows Upgrade phase, all the files required
by the Setup program are copied to the hard drive. During the process,
the computer automatically reboots. This process takes several minutes
and proceeds automatically without user intervention. The following
process information messages appear on the screen along with a com-
pletion percentage for each:
1. Copying Windows files
2. Gathering files, settings, and programs
3. Expanding Windows files
4. Installing features and updates
5. Transferring files, settings, and programs
After your computer finishes copying files and reboots, you will be in
the Setting Up Windows phase of the installation. Perform the following
steps to complete the upgrade:
1. The first screen asks for your Windows product key. Type your
25-digit product key and click Next.
2. Settings related to Windows Update and security appear next. You
can use the recommended settings, install important updates only,
or have the computer ask you later.
3. On the next screen, you review your time and date settings. Set up
your local time and date and choose if you want daylight savings
time. Click Next.
4. The installation completes.
When you install Windows 7, you might run into setup problems or
errors. Let’s take a look at the troubleshooting process involved with
Windows 7 installations.
Troubleshooting Installation Problems
The Windows 7 installation process is designed to be as simple as possible.
The chances for installation errors are greatly minimized through the use
of wizards and the step-by-step process. However, errors may occur.
650479c01.indd 30 9/9/10 8:39:38 PM