Datasheet

Chapter 1 • The Revit World
26
FIGURE 1.37 You can use the steering wheel to navigate through a view.
3. Now click and hold Rewind in the steering wheel. You can now fi nd
an older view, as shown in Figure 1.38.
FIGURE 1.38 Because Revit does not include zoom commands in the Undo
function, you can rewind to find previous views.
4. Do the same for Pan, which is also found on the outer ring of the
steering wheel. After you press and hold Pan, you can navigate to
other parts of the model.
Although you can do all of this with your wheel button, some users still prefer
the icon method of panning and zooming. For those of you who prefer the icons,
you will also want to use the icons for the traditional zooms as well.
Traditional Zooms
The next items on the Navigation bar are the good old zoom controls. The abili-
ties to zoom in, zoom out, and pan are all included in this function, as shown in
Figure 1.39.
Of course, if you have a mouse with a wheel, you can zoom and pan by either
holding down the wheel to pan or by wheeling the button to scroll in and out.
610114c01.indd 26610114c01.indd 26 12/7/10 3:29:38 PM12/7/10 3:29:38 PM