Datasheet
31
■ BASIC DIGITAL CAPTURE WORKFLOW
In Adobe Camera Raw
Similarly in ACR, to apply the profile, follow these steps:
1. Open the images in ACR.
2. Select them, click on the Camera Calibration tab, and select the profile you
saved earlier from the Camera Profile pop-up (Figure 1.36).
Figure1.36 Apply a camera prole in ACR.
3. To save a new Camera Raw Default, apply the profile and then go to the Basic
pane.
4. Set the white balance to As Shot, and set any additional adjustments you prefer.
5. Select Save New Camera Raw Default from the settings drop-down
(Figure 1.37).
Figure 1.37 Save a new Camera RAW default in ACR.
592120c01.indd 31 6/17/10 9:51:14 AM