Datasheet

25
■ BASIC DIGITAL CAPTURE WORKFLOW
Next, you will create the table for 2850º K. Open the tungsten test shot. This
is more likely to be at 3000º K to 3400º K, depending on the lights you actually
used, but it will be close enough for this purpose. Once the tungsten test shot is open,
click the Chart tab, select 2850 K only as the table to build, and position the dots
(Figure 1.26).
Again, click the Create Color Table button and you’ll be back at the Color
Tables tab, this time with the 2850 table created (Figure 1.27).
Figure 1.26 Open the second test shot.
Figure 1.27 Create the second table and you will have a complete dual temperature set waiting to be saved.
592120c01.indd 25 6/17/10 9:50:51 AM