Datasheet

■ Creating a Base Sculpting Mesh 31
12. Create a ZSphere chain for the foot and heel (Figure 1.61).
13. To add fingers, draw five small child spheres on the end of the arm as seen in
Figure 1.62.
Figure 1.60 Click
this icon to turn
off visibility on
the head measure
subtool.
Figure 1.61 Creating a ZSphere chain for the foot and heel
(a) (b)
Figure 1.62 (a) Adding the fingers; (b) the fingers in place
50260c01.indd 31 11/9/09 10:41:53 PM