Datasheet

File Types and Families
37
FIGURE 1.54: Each family .rfa file will contain multiple types
associated with that family.
8. Zoom in on the upper-left corner of the building as illustrated in
Figure 1.55.
9. To insert the door into the model, you must place it in the wall.
(Notice that before you hover your cursor over the actual wall, Revit
will not allow you to add it to the model, as shown in Figure 1.55.)
Once your pointer is directly on top of the wall, you will see the out-
line of the door. Once you see this, pick a point in the wall. The door
is inserted. (We will cover this in-depth in the next chapter.)
FIGURE 1.55: Inserting a hosted family (.rfa)
47222c01.indd 37 8/12/10 11:16:19 AM