Datasheet

Customizing the Quick Access Toolbar
574
Removing buttons from the Quick Access toolbar
Use one of these techniques to remove buttons from the Quick Access
toolbar:
✦ Right-click a button on the toolbar and choose Remove from Quick
Access Toolbar on the shortcut menu, as shown in Figure 1-3.
✦ Right-click any button or tab and choose Customize Quick Access
Toolbar. You see the Customize category of the PowerPoint Options
dialog box (refer to Figure 1-2). Select the button you want to remove
on the right side of the dialog box and click the Remove button.
Placing the Quick Access toolbar
above or below the Ribbon
The Ribbon is the stretch of ground along the top of the screen where the
tabs and buttons are found. If your Quick Access toolbar is too large, con-
sider placing it below the Ribbon, not above it (refer to Figure 1-1). Follow
these instructions to place the Quick Access toolbar above or below the
Ribbon:
✦ Quick Access toolbar below the Ribbon: Right-click the toolbar and,
on the shortcut menu, choose Show Quick Access Toolbar Below the
Ribbon.
✦ Quick Access toolbar above the Ribbon: Right-click the toolbar and,
on the shortcut menu, choose Show Quick Access Toolbar Above the
Ribbon (refer to Figure 1-3).
The PowerPoint Options dialog box offers a check box called Show Quick
Access Toolbar below the Ribbon (refer to Figure 1-2). You can select this
check box as well to move the toolbar below the Ribbon.
Figure 1-3:
Right-click a
button or tab
to remove it.
35_040629 bk07ch01.qxp 11/29/06 12:23 AM Page 574