Installation Manual

ManualsBrandsWiley Electronics ManualsRacking & Mounting HardwareLay-in Grounding Lug

For Universal Bonding

Applications

WEEBL-6.7

WEEB Bonding Jumper-6.7

Products are tested to UL 467

UL standard for safety grounding and bonding equipment

Please read carefully before installing.

3098177

WEEB-9.5 NL

Document Number 104-0404-000001-203

Wiley Electronics LLC. 2006-2009







WEEB-9.5

Wiley Electronics LLC

Washer, Electrical Equipment Bond

WEEB

Patent Pending

INSTALLATION INSTRUCTIONS

Summary of content (4 pages)

PAGE 1
Wiley Electronics LLC Washer, Electrical Equipment Bond WEEB Patent Pending INSTALLATION INSTRUCTIONS For Universal Bonding Applications Please read carefully before installing. WEEB-9.5 WEEBL-6.7 WEEB-9.5 NL WEEB Bonding Jumper-6.7 Products are tested to UL 467 3098177 UL standard for safety grounding and bonding equipment Document Number 104-0404-000001-203 Wiley Electronics LLC.
PAGE 2
WEEB COMPATIBILITY The WEEB family of products can be used to bond anodized aluminum, galvanized steel, steel and other electrically conductive metal structures. WEEB-9.5 / WEEB-9.5NL The WEEB-9.5 and WEEB-9.5NL are designed for bonding pole and ground mount systems as well as other universal mounting structures. The retaining legs on the WEEB-9.5's are designed to fit in a 3/8"diameter clearance hole and are compatible with 1/4"-5/16" fasteners. The WEEB9.
PAGE 3
WEEBL-6.7 assembly The following are a few universal ways to use the WEEBL-6.7 assembly with an equipment ground conductor. No removal of the anodized surface is required. Connect Solar Module Frame to Ground Conductor Solar Module Frame OK Solar Module Mounting Hole WEEBL-6.7 assembly Connect Mounting Frame to Ground Conductor WEEBL-6.7 assembly Module Mounting Frame OK Important note: 1.
PAGE 4
WEEB Bonding Jumper The WEEB Bonding Jumper can be use to electrically connect any two pieces of anodized aluminum, galvanized steel, steel and other electrically conductive metal. Torque to 10 ft-lb / 13.5 N-m using general purpose anti-seize compound on threads WEEB Bonding Jumper OK Torque to 10 ft-lb / 13.5 N-m using general purpose anti-seize compound on threads WEEB Bonding Jumper OK Drill 17/64" clearance hole to install WEEB Bonding Jumper Important note: 1.