Installation Manual

WEEB teeth towards rail
Assemble WEEBL-6.7 assembly and
torque fasteners to 10 ft-lb / 13.5 N-m
using general purpose anti-seize
compound on threads.
Drill bolt clearance hole
17/64in / 7mm on center
of vertical rail support .
For best aesthetics, drill hole
on least visible side of rail.
7
WEEBLUG ASSEMBLY
Wiley Electronics LLC. 2006-2010



All Rights Reserved
Important note:
WEEB-6.7 that sits under the WEEBLug is for SINGLE USE ONLY!
Ensure position is correct before tightening.