Installation Manual

Slightly lift solar module and
slide the teeth of the WEEB-DPF
under the module. The edge of the
WEEB will automatically align when
both modules are correctly installed.
3.00 mm
No more than
6
Wiley Electronics LLC. 2006-2010



All Rights Reserved
Important note:
To correctly install WEEB-DPF, each side of the mid-clamp must
cover at least 135 mm² of the module frame. This means that there
can be no more than 3.0 mm of space between the mid-clamp and
the module frame. Check with the module manufacturer for any
additional installation requirements.